Pinpoint Test E: B115E:98
WARNING: This page is about a different car, the 2023 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE: The DTC may occur during extremely high ambient temperature. Allow the driver status monitor camera to cool. The interior monitor system resumes operation after the camera cools.
Refer to Cruise Control for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Interior Camera System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition CMR B115E:98 Camera Module: Component Or System Over Temperature A continuous memory and on-demand DTC that sets when the driver status monitor camera is over temperature. This may occur during extended use in extremely high weather temperatures. The interior monitor system operation resumes after the driver status monitor camera cools. Possible Sources
- Driver status monitor camera
- E1 CONFIRM THE DTC (DIAGNOSTIC TROUBLE CODE) RESETS
- Ignition ON.
- Connect the diagnostic tool.
- Using the diagnostic scan tool, clear the DTC.
- Ignition OFF.
- Wait 10 seconds.
- Ignition ON.
- Wait 1 minute.
- Using the diagnostic scan tool, perform the CMR self-test.
Is DTC B115E:98 still present?
Yes INSTALL a new driver status monitor camera. REFER to: Driver Status Monitor Camera . No The system is operating correctly at this time. The DTC may have been set due to an intermittent fault condition or the driver status monitor camera module may have cooled enough allowing the DTC to clear.