Pinpoint Test B: B11DB:49
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B11DB:49 Battery Monitoring Module "A": Internal Electronic Failure Sets in the BCM when an internal electronic failure is detected. Possible Sources
- BCM
- B1 RETRIEVE BCM (BODY CONTROL MODULE) DTC (DIAGNOSTIC TROUBLE CODE)
- Ignition ON.
- Using a diagnostic scan tool, clear the DTC.
- Wait 10 seconds.
- Using a diagnostic scan tool, perform the BCM self-test.
Is DTC B11DB:49 recorded?
Yes INSTALL new battery monitoring sensor. REFER to: Battery Monitoring Sensor . No The system is operating correctly at this time.