Pinpoint Test Ai : U0198:00: Notes
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The PCM continuously monitors the CAN for messages from the TCU. This DTC sets when the PCM does not receive the TCU message within the defined amount of time.
Possible Sources
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- Communication error
- Low battery condition
- Battery recently replaced
- RJB fuse 1 (5A)
- TCU
- PCM
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0198:00 | Lost Communication With The Telematic Control Unit Module (TCU) | After the PCM, TCU wake up the PCM did not detect a response from the TCU. |