LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Taurus SHO >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Information System And Entertainment System - 8 Inch Touchscreen >> General Procedures >> Audio Control Module (ACM) Self-Diagnostic Mode

Audio Control Module (ACM) Self-Diagnostic Mode

NOTE: If the ACM is completely inoperative (does not power up), the part number decal on the ACM chassis can be used to attain the ACM part number.
  1. Turn the ACM on.
  2. Operate the audio system in radio tuner (AM/FM) mode.
  3. Press and hold the eject button, and within 1 second, press the seek up button until the speaker walk-around test begins.
    • The display indicates each speaker as it is tested.
  4. NOTE: If the speaker walk-around test is the only test required, this procedure can be stopped after Step 3 by turning the ACM off or by selecting exit using the touchscreen.

    Once the speaker walk-around test is complete, the following information is available through the "BEZEL DIAGNOSTICS" menu using the audio system control buttons:

    NOTE: The AHU Diagnostics refers to the ACM and EFP Diagnostics refers to the FCIM.
    Menu Sub-Menu
    APIM Diagnostics Part Numbers
      Software Versions
      Configuration Status
      GPS Information
      Tones Test
      Rear Tones Test
      Touch Screen Calibration
      Touch Screen Activation Test
      Display Test Pattern
      RGB Pixel Test
      Exit Diagnostics
    AHU Diagnostics AHU Part Numbers/Sirius ESN
      Radio Signal Strength
      Exit Diagnostics
    EFP Diagnostics EFP Part Number
      Exit Diagnostics
  5. To exit the self-diagnostic mode, turn the ACM off.