Hydraulic Power Assist Steering (HPAS)
The steering wheel rotation sensor (on vehicles equipped with HPAS) measures the rate of rotation of the steering wheel by monitoring a clock spring slotted wheel as it passes through the sensor gap. The rotation sensor uses 2 signal lines to transmit information to the ABS module about whether the steering wheel is being turned left or right and how far it is being turned. The rotation sensor installed on HPAS vehicles is a relative sensor and does not indicate the position of the steering wheel relative to straight ahead. At each consecutive ignition cycle, the steering wheel angle sensor "zeroes" itself
The SASM measures the rate of rotation of the steering wheel by monitoring the steering wheel rotation ring as it passes through the sensor gap. The SASM uses the HS-CAN bus to transmit information to the ABS module about whether the steering wheel is being turned left or right and how far it is being turned.