LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Edge SE, 2.0 9 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System And Stability Control >> Removal And Installation >> Wheel Speed Sensor - Rear >> Removal and Installation

Removal and Installation

  1. Remove the wheel and tire. For additional information, refer to WHEELS AND TIRES .
  2. Disconnect the wheel speed sensor electrical connector.
  3. Disconnect the pushpin fasteners.
  4. Remove the wheel speed sensor bolt and the wheel speed sensor.
    • To install, tighten to 9 Nm (80 lb-in).
  5. To install, reverse the removal procedure.