LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> E 350 V10-6.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Connecting Rod >> Specifications

Connecting Rod: Specifications










a The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 105.5 mm on each side of rod centerline.

ROD BEARING CAP




Tighten the connecting rod bolts in the sequence shown.
Stage 1: Tighten to 43 Nm (32 lb-ft).
Stage 2: Tighten an additional 105 degrees.