LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Ranger 4WD V6-4.0L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Tightening Torque & Sequence >> Cylinder Head

Cylinder Head

Install 8 new 12-mm bolts and tighten in the sequence shown in 2 stages.
Stage 1: Tighten to 12 Nm (106 lb-in).
Stage 2: Tighten to 25 Nm (18 lb-ft).






Install 2 new 8-mm bolts Tighten to 32 Nm (24 lb-ft).






Tighten the 8 new 12-mm bolts in the sequence shown in 2 stages.
Stage 1: Rotate 90 degrees.
Stage 2: Rotate an additional 90 degrees.