LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Ranger 2WD V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor (HO2S)

Heated Oxygen Sensor (HO2S)




Heated Oxygen Sensor (HO2S)









Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the Heated Oxygen Sensor (HO2S) electrical connector.

3. NOTE: If necessary, lubricate the HO2S with lock lubricant to assist in removal.

Using the Exhaust Gas Oxygen Sensor Socket, remove the HO2S.





Installation

1. Apply a light coat of nickel anti-seize lubricant to the threads of the HO2S.

2. Using the Exhaust Gas Oxygen Sensor Socket, install the HO2S.
- Calculate the correct torque wrench setting for the following torque.

- Using the Exhaust Gas Oxygen Sensor Socket, tighten to 48 Nm (35 lb-ft).





3. Connect the HO2S electrical connector.