LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 4WD V8-4.6L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Service and Repair >> Crossmember - 1B

Crossmember - 1B




Crossmember - 1B


Crossmember 1B:






Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, Vehicle Jacking and Lifting.
2. Remove the 4 crossmember bolts.
3. Remove the 4 crossmember nuts.
- To install, tighten to 103 Nm (76 lb-ft).

4. Remove the 1B crossmember.
5. To install, reverse the removal procedure.