LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Ranger 4WD V6-3.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Procedures >> Heat Shield

Heat Shield

Heat Shield





Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.

2. NOTE: If equipped, the transmission servo heat shield needs to be unclipped from the fluid pan rail and positioned aside for fluid pan removal.

If equipped, loosen the nut and position the heat shield aside.
3. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
^ Tighten to 10 Nm (89 lb-inch).