LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Ranger 4WD V6-3.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Engine Block Heater >> Service and Repair

Engine Block Heater: Service and Repair

Block Heater

Removal and Installation





1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Disconnect the block heater electrical connector.

4. NOTE: Do not loosen the screw more than necessary for removal.

Loosen the block heater screw and twist and slide the block heater to release the retainer clip. Discard the retainer clip and remove the block heater.
5. To install, reverse the removal procedure.