LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Focus L4-2.0L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Cellular Phone >> Communications Control Module >> Service and Repair >> Removal and Replacement >> Universal Serial Bus (USB) Cable And Port

Universal Serial Bus (USB) Cable And Port

UNIVERSAL SERIAL BUS (USB) CABLE AND PORT

Removal and Installation

1. NOTE: Lower the glove compartment completely to access the connector.

Disconnect the universal serial bus (USB) cable from the accessory protocol interface module (APIM).

2. Remove the instrument panel center finish panel.
3. Release the pin-type retainers and remove the USB cable and port.
4. To install, reverse the removal procedure.