LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> F 150 4WD V6-4.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Pinpoint Tests >> Test M: No Power To The Scan Tool

Test M: No Power To The Scan Tool

PINPOINT TEST M: NO POWER TO THE SCAN TOOL

Normal Operation
The scan tool connects to the data link connector (DLC) to communicate with the controller area network (CAN), universal asynchronous receiver-transmitter (UART)-based protocol (UBP) communications network and the international standards organization (ISO) 9141 communications networks.

This pinpoint is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- Scan tool


M1-M2:






M3: