LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> E 150 V8-5.4L >> Repair and Diagnosis >> Heating and Air Conditioning >> Expansion Block/Orifice Tube >> Service and Repair

Expansion Block/Orifice Tube: Service and Repair

EVAPORATOR CORE ORIFICE

Special Tool(s)


Special Tool(s):











Removal
1. Disconnect the evaporator inlet fitting.
- Discard the O-ring seal.

2. Inspect the evaporator core orifice for damage before attempting to remove it from the evaporator core inlet line.
3. If the evaporator core orifice is intact, engage the special tool. Hold the T-handle stationary while rotating the tool body to remove the evaporator core orifice.







4. If the evaporator core orifice is broken, screw the end of the special tool into the broken orifice. Hold the T-handle stationary while rotating the tool body to remove the evaporator core orifice.







Installation
1. Lubricate the evaporator core orifice O-rings with clean PAG oil and install the evaporator core orifice using the special tool.







2. Connect the evaporator inlet fitting.
- Install a new O-ring seal.
- Tighten to 18 Nm (13 lb-ft).