LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> E 150 V8-5.4L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> ABS Sensor Block >> Service and Repair

ABS Sensor Block: Service and Repair

Stability Control Sensor Cluster





Removal and Installation
1. Disconnect the stability control sensor cluster electrical connector.
2. Remove the 2 stability control sensor cluster bolts.
^ To install, tighten to 6 Nm (53 lb-in).
3. Remove the stability control sensor cluster.
4. To install, reverse the removal procedure.
^ Calibrate the ABS module. Follow the scan tool directions.