LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> E 150 V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Tube >> Service and Repair

EGR Tube: Service and Repair

EXHAUST MANIFOLD TO EXHAUST GAS RECIRCULATION (EGR) VALVE TUBE

Removal and Installation
1. Remove the engine cover.
2. Disconnect the upper exhaust manifold-to-EGR system module tube fitting nut.
- To install, tighten to 40 Nm (30 lb-ft).

3. Disconnect the lower exhaust manifold-to-EGR system module tube fitting nut. Remove the EGR system module tube.
- To install, tighten to 40 Nm (30 lb-ft).

4. To install, reverse the removal procedure.