LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Crown Victoria V8-4.6L >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Service and Repair

Turn Signals: Service and Repair

SIDE TURN SIGNAL LAMP


Crown Victoria:






Grand Marquis:






Removal and Installation

All vehicles
1. Remove the 3 pin-type retainers and the radiator sight shield.







Crown Victoria
2. Remove the side turn signal lamp screw.
3. Remove the nut and the side turn signal assembly.
- Disconnect the electrical connector.
- To install, tighten to 5 Nm (44 lb-in).

Grand Marquis
4. Remove the 2 nuts and the side turn signal assembly.
- Disconnect the electrical connector.
- To install, tighten to 5 Nm (44 lb-in).

All vehicles
5. To install, reverse the removal procedure.