LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Freestar Base, 4.2 2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls >> Removal And Installation >> Power Steering Pressure (PSP) Switch >> Removal And Installation

Removal And Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  3. Disconnect the PSP switch electrical connector.
  4. Remove the PSP switch.
    • To install, tighten to 17 Nm (13 lb-ft).
  5. To install, reverse the removal procedure.