LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Escape 4WD L4-2.3L VIN Z >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Service and Repair >> High Pressure Cutoff Switch

High Pressure Cutoff Switch

HIGH PRESSURE CUTOFF SWITCH







Removal and Installation
1. Disconnect the high-pressure cutoff switch electrical connector.
2. Remove the high-pressure cutoff switch.
- Discard the O-ring seal.

3. To install, reverse the removal procedure.
- Install a new O-ring seal.