LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Mustang V8-4.6L VIN H >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair

Ignition Coil: Service and Repair

IGNITION COIL-ON-PLUG


Engine Ignition Components - Exploded View:






Exploded View

Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the ignition coil electrical connectors.
3. Remove the ignition coil bolts.
- To install, tighten to 5 Nm (44 lb-in).

4. NOTE: When removing the ignition coils, a slight twisting motion will break the seal and ease removal.

Remove the ignition coils.

5. To install, reverse the removal procedure.
- Apply a light film of silicone brake caliper grease and dielectric compound to the inside of the coil boots before installation.