Removal and Installation
- Disconnect the two rear window defrost grid electrical connectors.
Courtesy of FORD MOTOR CO.
- Remove the rear window wiper pivot arm.
- Lift the pivot arm nut cover.
- Disconnect the rear window washer hose.
- Remove the nut.
- Remove the pivot arm.
Courtesy of FORD MOTOR CO.
- Remove the rubber grommet.
Courtesy of FORD MOTOR CO.
- Remove the screw covers.
Courtesy of FORD MOTOR CO.
- Remove the screws and the liftgate handle.
Courtesy of FORD MOTOR CO.
- Remove all of the liftgate interior trim panels.
Courtesy of FORD MOTOR CO.
- Disconnect the washer hose.
Courtesy of FORD MOTOR CO.
- Disconnect the lock rod.
Courtesy of FORD MOTOR CO.
- Disconnect the latch rod.
Courtesy of FORD MOTOR CO.
- Remove the six nuts.
Courtesy of FORD MOTOR CO.
- Remove the liftgate exterior molding.
Courtesy of FORD MOTOR CO.
- Remove the rear wiper motor.
- Remove the three rear wiper motor bolts.
- Disconnect the electrical connector.
- Remove the rear wiper motor.
Courtesy of FORD MOTOR CO.
- Remove the 16 nuts.
Courtesy of FORD MOTOR CO.
- With the aid of an assistant, remove the liftgate glass from the liftgate.
- To install, reverse the removal procedure.
- Seal the liftgate glass assembly with 4-mm (0.16-in) bead of foam core butyl or equivalent meeting Ford specification WSB-M4GB45-A.