LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Removal And Installation >> Hose >> Installation

Removal And Installation: Hose: Installation

CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components can result.
    NOTE: When connecting a fitting with a Teflon® seal, a new seal must be installed.
  1. Using the special tool, install a Teflon® seal over a fitting.
    • Fill and leak check the system. For additional information, refer to STEERING SYSTEM-GENERAL INFORMATION .
      Fig 1: Installing Teflon(R) Seal On Power Steering Pressure Hose Fitting
      G03879007Courtesy of FORD MOTOR CO.