LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System >> Removal And Installation >> Spark Plugs >> Removal and Installation

Removal and Installation

  1. Remove the ignition coil on plug. For additional information, refer to IGNITION COIL-ON-PLUG .
  2. NOTE: Use compressed air to remove any debris from the spark plug well before removing the spark plugs.
    Fig 1: Removing Spark Plugs
    G04002662Courtesy of FORD MOTOR CO.
  3. Remove the spark plugs.
  4. Inspect the spark plugs. For additional information, refer to ENGINE SYSTEM-GENERAL INFORMATION .
  5. To install, reverse the removal procedure.
    • Adjust the spark plug gap as required.
      Fig 2: Inspecting Spark Plugs
      G04002663Courtesy of FORD MOTOR CO.