LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Focus SVT, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Removal And Installation >> Catalytic Converter - SVT >> Installation

Catalytic Converter - SVT: Installation

    NOTE: Lightly coat the heated oxygen sensors (HO2S) with anti-seize grease.
    NOTE: Always install new fasteners and gaskets.
    NOTE: Do not tighten the fasteners until all components are assembled. Make sure to tighten all fasteners beginning at the front of the vehicle.
    NOTE: Clean the mating surfaces of the manifold and the catalytic converter. To correctly seat the converter, alternately tighten the exhaust manifold-to-catalytic converter nuts to specification.
  1. To install, reverse the removal procedure.