LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Cruise Control System) >> Removal And Installation >> Actuator Cable >> Removal

Actuator Cable: Removal

WARNING: This page is about a different car, the 2003 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the speed control servo. For additional information, refer to ACTUATOR-SPEED CONTROL SERVO .
  2. Disconnect the speed control actuator cable from the throttle bracket by squeezing the locking ears.
    Fig 1: Disconnecting Speed Control Actuator Cable From Throttle Bracket
    G01309337Courtesy of FORD MOTOR CO.