LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Mustang Mach 1, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Cylinder Bore - Taper

Cylinder Bore - Taper

  1. Measure the cylinder bore at the top, middle, and bottom of piston, ring travel in two directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. Bore the cylinder to the next oversize.
    • Refer to the appropriate ENGINE article for the procedure.
    Fig 1: Measuring Cylinder Bore At Top, Middle, And Bottom Of Piston, Ring Travel In Two Direction
    G01623421Courtesy of FORD MOTOR CO.