LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Focus ZX5, 2.0 3, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission External Controls System >> Removal And Installation >> Brake Shift Interlock Actuator >> Removal

Brake Shift Interlock Actuator: Removal

  1. Remove the floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the overdrive (O/D) switch electrical connector (selector lever assembly removed shown).
    Fig 1: Disconnecting Overdrive (O/D) Switch Electrical Connector
    G01613069Courtesy of FORD MOTOR CO.
  3. Remove the shift interlock actuator.
    1. Remove the bolt.
    2. Pull off the knob.
    3. Pull out of the push rod.
    Fig 2: Removing Shift Interlock Actuator
    G01613070Courtesy of FORD MOTOR CO.