LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Focus ZTS, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine-SVT) >> In-Vehicle Repair >> Oil Pan >> Removal

Oil Pan: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM .
  2. Drain the engine.
  3. Remove the oil pan retaining bolts.
    Fig 1: Removing Oil Pan Retaining Bolts
    G01615686Courtesy of FORD MOTOR CO.
  4. CAUTION: To prevent damage to the sealing surface, only use the special tool shown to remove the oil pan.
    NOTE: Tighten the locknut against the oil pan and tap the special tool several time to release the oil pan from the lower crankcase.
    Fig 2: Removing Oil Pan
    G01615687Courtesy of FORD MOTOR CO.
  5. Using the special tool, remove the oil pan.