LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Removal & Installation >> Coil Spring & Strut Assembly >> Removal

Coil Spring & Strut Assembly: Removal

CAUTION: DO NOT damage stabilizer bar link ball stud seals. DO NOT over-extend drive axle shaft during removal, as CV joint components may separate.

Turn ignition switch to OFF position. Ensure steering column is not locked. Raise and support vehicle. Remove wheel assembly. Remove stabilizer bar link from strut. Remove strut-to-knuckle pinch bolt. Push down on steering knuckle until strut and spring assembly is free of steering knuckle. Wire axle shaft to body to maintain level position. Partially lower vehicle. Remove and discard 3 top mount-to-strut tower nuts. Remove strut and spring assembly.