Ball Joint Checking
NOTE:
Prior to inspecting ball joints, it is necessary to inspect wheel bearings. See WHEEL BEARINGS
under ADJUSTMENTS & INSPECTION.
CAUTION:
When hoisting FWD vehicles, ensure hoist adapters are positioned properly. See
JACKING & HOISTING in appropriate SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
With vehicle still raised, position safety stand beneath lower control arm to be tested. While assistant pulls and pushes top and bottom of tire, watch for movement between lower end of knuckle and control arm. Movement indicates ball joint wear. If ball joint is worn, replace lower control arm assembly. See LOWER CONTROL ARM under REMOVAL & INSTALLATION.