Preliminary Inspection
- Ensure vehicle is at normal operating temperature when inspecting. Thoroughly road test vehicle to verify customer concern. Determine if problem occurs during upshift, downshift, coasting or engagement. If noise is to be diagnosed, determine if noise is affected by engine speed, vehicle speed, gear selection or temperature.
- Inspect fluid level and condition. Visually inspect for vehicle modifications, electronic add-ons, fluid leaks and/or incorrect gear linkage adjustment. Check for Diagnostic Trouble Codes (DTCs) before any mechanical repair is performed. See FORD 4F27E ELECTRONIC CONTROLS article for DTC diagnosis and repair procedures. If no DTCs are present, see applicable SYMPTOM DIAGNOSIS.