LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Focus S2 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul >> Performance Tests >> Hydraulic Pressure Tests >> Line Pressure

Line Pressure

Connect a pressure gauge to line pressure test port. See Fig 1 . Start engine. Apply service and parking brakes. Check line pressures in all gears. See LINE PRESSURE SPECIFICATIONS  table. If line pressures are not as specified, see HYDRAULIC PRESSURE TEST RESULTS  for possible causes.

Fig 1: Locating Transaxle Line Pressure Test Port
G00022510Courtesy of FORD MOTOR CO.
LINE PRESSURE SPECIFICATIONS

Selector Position Idle RPM - psi (kg/cm2 ) WOT Stall RPM - psi (kg/cm2 )
"P" & "N" 50-65 (3.5-4.6) 180-210 (12.65-14.77)
"R" 65-85 (4.6-6.0) 280-335 (19.69-23.55)
"D", "2" & "1" 50-65 (3.5-4.6) 180-210 (12.65-14.77)