LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Focus S2 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul >> Component Disassembly & Reassembly >> Valve Body Assembly >> Disassembly & Reassembly

Disassembly & Reassembly

Remove solenoid body bolts and solenoid body from valve body. See Fig 1 . Discard solenoid body gaskets and seals. Note locations of valve body shift solenoids. See Fig 2 . Remove valve body bolts and disassemble valve body. See Fig 3 . Note order, direction and location of all components for reassembly reference. Inspect valve body and replace with NEW separator plate and gasket. To reassemble, reverse disassembly procedure. Install solenoid body bolts and tighten to specification. See TORQUE SPECIFICATIONS  Install remaining valve body bolt and tighten in the sequence shown. .

Fig 1: Locating Solenoid Body Bolts
G00022525Courtesy of FORD MOTOR CO.
Fig 2: Identifying Valve Body Shift Solenoids
G00026715Courtesy of FORD MOTOR CO.
Fig 3: Exploded View Of Valve Body Assembly
G00022524Courtesy of FORD MOTOR CO.
Fig 4: Valve Body Bolt Tightening Sequence
G01612872