Disassembly & Reassembly
NOTE:
Converter housing side bearing races for transfer shaft bearing and differential case bearing will be installed during transaxle assembly.
Remove drive axle seals. Remove differential case bearing races. Remove final drive input gear bearing race. Remove transfer shaft gear bearing races. On 2001 models, note the location of the bleed hole in the funnel in relation to the bottom of the case. On all applications, remove funnel. Rotate transaxle case 180 degrees and remove final drive input bearing race. See Figure . To reassemble, reverse disassembly procedure. On 2001 models, not the location of the bleed hole when installing the funnel. See Fig 1 .