LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission Servicing >> Adjustments >> Shift Cable >> Focus >> Focus (With IB5)

Focus (With IB5)

  1. Ensure gearshift lever is in Neutral position. Remove gearshift lever cover. Insert 3-mm drill bit. See Fig 1. Raise and support vehicle.
  2. Open shift and selector cable cover. See Fig 2. Adjust gearshift mechanism. Unlock selector cable by pressing colored insert. See Fig 3.
  3. Move selector lever to its center position. Engage 3rd or 4th gear (move the gearshift lever to its right-hand or left-hand stop position). Lock selector cable. Close shift and selector cable cover. Lower vehicle. Remove drill bit. Install shift lever cover.
Fig 1: Identifying Drill Bit Inserted In Gearshift Assembly (Focus - With IB5)
G00120858Courtesy of FORD MOTOR CO.
Fig 2: Removing Shift & Selector Cable Cover (Focus - With IB5)
G00120859Courtesy of FORD MOTOR CO.
Fig 3: Identifying Selector Cable (Focus - With IB5)
G00120860Courtesy of FORD MOTOR CO.