Power Seat Inoperative
- Check POWER SEAT fuse (30-amp) in fuse panel. If fuse is okay, go to step 3). If fuse is blown, replace fuse. If fuse blows again, go to next step. If fuse does not blow, go to step 3).
- With ignition off, disconnect both power seat switch connectors. Remove 30-amp POWER SEAT fuse. Measure resistance of White/Black wire between fuse junction box and seat back control switch connector. Measure resistance of White/Black wire between seat back control switch connector and ground. If resistance is less than 5 ohms between fuse box and switch, and more than 10 k/ohms between switch and ground, replace POWER SEAT fuse. If resistance is more than 5 ohms between fuse box and switch, and less than 10 k/ohms between switch and ground, repair White/Black wire for open or short to ground.
- Test power seat switch. See SWITCH TEST under TESTING. If switch tests okay, go to next step. If switch faulty, replace seat control switch and housing.
- Turn ignition off. Disconnect power seat back control switch connector. Measure voltage at White/Black wire terminal of connector. If voltage is more than 10 volts, repair Black wire between connector and ground. If voltage is less than 10 volts, repair White/Black wire.