LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Explorer 4WD V8-302 5.0L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Testing and Inspection >> Component Tests and General Diagnostics >> In-Vehicle Testing >> Output Test

Output Test

1. Connect tachometer to engine.
2. With engine running, turn A/C blower motor to the maximum position and headlamps to the high beam position.
3. Increase engine speed to approximately 2000 RPM.
4. Voltmeter should indicate a minimum of 1/2 volt above normal.
5. If voltage is within specifications, the charging system is operating correctly.
6. If voltage is not within specifications, refer to "Over Voltage" or "Under Voltage Test."
Over Voltage Test
Under Voltage Test