LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Explorer 4WD V8-302 5.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Chain >> Service and Repair

Timing Chain: Service and Repair

REMOVAL AND INSTALLATION
1. Remove engine timing cover.
2. Check timing chain deflection. If deflection exceeds 0.50 inch, replace chain and sprockets.
3. Ensure No. 1 cylinder is on compression stroke, TDC.

Fig. 8 Timing Mark Alignment.:






4. Crank engine until timing marks on sprockets are aligned.
5. Remove camshaft sprocket bolt and washer. Slide crankshaft sprocket, camshaft sprocket and timing chain forward and remove.
6. Reverse procedure to install. Ensure alignment marks match when installing chain and sprockets.