Steering Gear: Installation
- Turn steering wheel to straight-ahead position. Center steering gear input shaft with centerline of flats facing 4 o'clock. Slide steering gear input shaft into flex coupling and into place on frame side rail. Install and tighten attaching bolts.
- Ensure wheels are in straight-ahead position and install pitman arm, lock washer and nut on sector shaft. Tighten nut to specification. See TORQUE SPECIFICATIONS . Move flex coupling into place on steering gear input shaft and install attaching bolt.
- Install and tighten pressure and return lines to steering gear. Fill reservoir and bleed system. See HYDRAULIC SYSTEM BLEEDING under LUBRICATION. Reinstall stone shield.