Instrument Panel Mounted Tailgate Switch (Bronco)
- Remove window regulator control switch from the vehicle. See WINDOW SWITCH
under REMOVAL & INSTALLATION. Use a self-powered test lamp, or an ohmmeter to test the window regulator control switch.
- With the window regulator control switch in the neutral position, there should be continuity between terminals No. 1 and 2, and terminals No. 3 and 4. Terminal No. 5 should be disconnected from all other terminals. See Fig 1
.
- When the switch rocker knob is pushed up to close the tailgate window, there should be continuity between terminals No. 1 and 2, and terminals No. 4 and 5. Terminal No. 3 should be disconnected from all other terminals.
- When the switch rocker knob is pushed down to open the back window glass, there should be continuity between terminals No. 2 and 5, and terminals No. 3 and 4. Terminal No. 1 should be disconnected from all other terminals.
- If the window regulator control switch does not test as stated, replace the switch.
Courtesy of FORD MOTOR CO.