LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Other Variant >> HVAC Control Systems >> A/C "O" Ring Removal From Spring Lock Coupling (95-2-2)

A/C "O" Ring Removal From Spring Lock Coupling (95-2-2)

WARNING: This page is about the Probe Base, Automatic, which is a different variant/trim than selected.
Publication date: 1995-01-30
Reference number: 95-2-2
Supersedes refnos: 93-15-5

A/C "O" RING REMOVAL FROM SPRING LOCK COUPLING

A/C "O" RING REMOVAL FROM SPRING LOCK COUPLING

TECHNICAL SERVICE BULLETIN

Reference Number(s): 95-2-2, Date of Issue:  January 30, 1995
Superceded Bulletin(s): 93-15-5, Date of Issue:  July 21, 1993

AIR CONDITIONING - O-RING REMOVAL FROM SPRING LOCK COUPLER - SERVICE TIP

APPLICATION

Model(s): Ford: 1981-95 Mustang

1982-83 Fairmont

1982-88 EXP

1982-95 Crown Victoria, Escort, Thunderbird

1983-86 LTD

1984-94 Tempo

1986-95 Taurus

1989-95 Probe

1995 Contour

Lincoln-Mercury: 1982-83 LN7, Zephyr

1982-87 Lynx

1982-95 Continental, Cougar, Grand Marquis, Town Car

1983-86 Marquis

1984-92 Mark VII

1984-94 Topaz

1986-95 Sable

1991-95 Tracer

1993-94 Capri

1993-95 Mark VIII

1995 Mystique

Light Truck: 1982-95 Bronco, F Super Duty, F-150-350 Series, Ranger

1983-90 Bronco II

1986-95 Aerostar

1988-95 Econoline

1991-95 Explorer

1995 Windstar

Bulletin No.: 95-2-2

Date: January 30, 1995

NOTE: This bulletin supersedes Technical Service Bulletin No. 93-15-5, dated July 21, 1993. This TSB is being republished in its entirety to include the latest level tools and procedures available.

ISSUE

Some technicians may use small screwdrivers to remove O-rings from spring lock coupling fittings. This practice can and has resulted in scratches across the O-ring grooves in the fittings. Loss of refrigerant charge in the system may result.

ACTION

It is recommended that a plastic toothpick, or equivalent tool, be used to remove O-rings. Refer to Fig 1 . Do not use the metal O-Ring Tool (T71P-19703-C). Only plastic O-Ring Tool (F5VH-17B017-AA) is approved for O-ring removal.

Fig 1: O-Ring Removal
G94I57610

OTHER APPLICABLE ARTICLES

91-22-5 ,

93-6-5

WARRANTY INFORMATION

WARRANTY STATUS: Information Only.

OASIS CODES: 208000, 208999