Rack & Pinion: Disassembly
- Mount rack and pinion in soft-jawed vise. Remove external hydraulic lines connecting valve body to rack housing. Remove dust boots.
- Remove solenoid valve from left mounting bracket. Remove mounting bracket and rubber mounting bushings from rack and pinion. Remove tie rod ends. See TIE ROD ENDS under REMOVAL & INSTALLATION. Using a chisel, uncrimp tie rod assembly lock washer. Using a 30-mm crowfoot wrench, remove tie rod from rack.
- Remove adjust cover lock nut. Using Yoke Torque Gauge (T88C-3504-AH), remove adjust cover, spring and pressure pad. Using Outer Box Torque Adapter (T88C-3504-CH), remove outer box assembly. Remove pinion shaft oil seal with a screwdriver.