LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 4.0L >> Quick Test >> Visual Check & Equipment Hookup >> Analog Volt-Ohmmeter (VOM)

Analog Volt-Ohmmeter (VOM)

  1. Turn ignition switch to OFF position. Set VOM at 0-15V DC range. Connect positive lead of VOM to positive battery terminal.
  2. Connect negative VOM lead to Self-Test Output (STO) terminal of self-test connector. See Figure. Connect jumper wire from Self-Test Input (STI) pigtail to signal return terminal of self-test connector. KOEO SELF-TEST will activate when ignition is turned on.