Column Shift
- Place gear selector lever in the Overdrive position. Ensure selector lever remains against stop by hanging an 8 lb. (3.6 kg) weight on selector lever.
- Loosen selector rod adjusting bolt (or nut). Push transmission lever downward to lowest position (third detent from full counterclockwise position).
- Ensure slotted rod end has flats aligned with flats on mounting stud, (if equipped). Ensure gear selector lever has not moved from the Overdrive position. Tighten bolt (or nut) and check operation in all selector (detent) positions. See Fig 1 and Fig 2.
Courtesy of FORD MOTOR CO.
Courtesy of FORD MOTOR CO.