KICKDOWN Cable Adjustments: G4A-El
- Turn engine off. Remove splash shield near left front tire. Remove square head plug from pressure port marked "L" and attach transmission oil pressure gauge to pressure port. See Fig 1.
- Turn kickdown cable lock nuts to farthest point away from throttle cam (loosen cable all the way). Start engine and warm to operating temperature. Engine should idle between 700-800 RPM in Park.
Courtesy of FORD MOTOR CO.
- With engine at idle, turn lock nuts toward throttle cam until line pressure exceeds 63-66 psi (4.4-4.6 kg/cm2
). Turn lock nuts away from throttle cam until line pressure stabilizes at 63-66 psi (4.4-4.6 kg/cm2
). Tighten lock nuts and turn engine off.
- Remove oil pressure gauge, install square head plug and tighten to 44-88 INCH lbs. (5-10 N.m). Road test vehicle.