LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Probe GT >> Repair and Diagnosis (Single Page) >> Steering >> Electronic Steering >> Steering Gear - Electronic >> Pinpoint Tests Menu >> Pinpoint Test D4 >> Vehicle Speed Sensor Function

Vehicle Speed Sensor Function

For analog (electro-mechanical) display dash only. Turn ignition off. Remove instrument cluster. See REMOVAL & INSTALLATION under VEHICLE SPEED SENSOR in this article. Disconnect speedometer cable from instrument cluster. Connect ohmmeter between Green/Red wire and Black wire of instrument cluster connector. Rotate speedometer cable connector on instrument cluster. If there are 4 continuity interruptions per speedometer cable rotation, proceed to PINPOINT TEST D5. If there are NOT 4 continuity interruptions, replace speedometer subassembly.

NOTE: The vehicle speed sensor is part of the speedometer subassembly on analog display dash equipped vehicles. The speedometer subassembly must be replaced when vehicle speed sensor is defective.