Diagnostic Procedure
There are 2 diagnostic procedure formats used to test and service the EEC-IV system: QUICK TEST and CIRCUIT TESTS. A DIAGNOSIS BY SYMPTOM test chart is available to identify specific CIRCUIT TESTS.
Always start with the QUICK TEST procedures before attempting any CIRCUITS TESTS. If a vehicle passes the QUICK TEST procedures the EEC-IV system is okay; problem exists somewhere else besides the EEC-IV system. If an intermittent driveability problem exists use the KEY ON ENGINE RUNNING (KOER) SELF-TEST or CONTINUOUS MONITOR SELF-TEST (WIGGLE TEST) to set a code and identify the problem.
NOTE:
Procedures in the TESTING section are not in absolute numerical order. Procedures not related to this engine have been removed to eliminate confusion.