LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1988 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnostic Codes >> Code 8 - No Dump Valve

Code 8 - No Dump Valve

  1. Unplug computer module connector. Check resistance between terminals No. 14 and 8, and ground. If resistance is 1-3 ohms, replace computer module. If resistance is less than one ohm, unplug electro-hydraulic valve connector.
  2. Check resistance between terminals No. 1 and 3. If resistance is less than one ohm, replace electro-hydraulic valve. If resistance is 1-3 ohms, repair shorted wire between terminal No. 1 on electro-hydraulic connector and computer module.
scientia non olet · About LEMON Manuals