LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1987 >> Bronco II 4WD V6-177 2.9L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Switch >> Service and Repair

Wiper Switch: Service and Repair

FRONT

1. Disconnect battery ground cable (two ground cables on diesel engines).
2. Remove steering column trim shrouds, then disconnect electrical connector from switch.
3. Peel back foam shield, then remove wiper switch attaching screws and the switch.
4. Reverse procedure to install.

REAR

1. Disconnect battery ground cable (two ground cables on diesel engines).
2. Remove headlight switch knob and bezel.
3. Pull finish panel away from instrument panel, then disconnect switch electrical connector.
4. Remove wiper switch to finish panel attaching screw, then the wiper switch.
5. Reverse procedure to install.